Easy Limewash over brick fireplace

Sharing is caring!

Is it possible to cover up an old brick fireplace with limewash by using one product only?

Short answer….yes…..JOINT COMPOUND. This Can be found by the buckets at any home improvement store. Just slather it on girlfreinds…..so easy! messy..but easy… wear a hat

Check out how good it looks in my sunken living room. I was brave enough to do this treatment to my bedroom as well as living room.

 

Step by Step tutorial How to limewash your old brick fireplace

Limewashing over brick with joint compound is a creative way to achieve a textured and rustic finish. Here’s a step-by-step tutorial to guide you through the process:

Materials You’ll Need:

1. Brick fireplace
2. roman clay colorant (optional)
3. Joint compound
4. Paintbrushes
5. Plastic drop cloths
6. Trowel or putty knife
7. Caulk
8. Painter’s tape (optional)
9. Gloves and safety goggles

Step 1: Prepare Your Workspace

• Lay down plastic drop cloths to protect the surrounding area and furniture. If desired, use painter’s tape to cover any areas you want to avoid getting joint compound or limewash on.

Step 2: Clean the Brick

• Ensure the brick surface is clean and free of dust, soot, and debris. Use a stiff brush or vacuum cleaner to remove any loose particles.

Step 3: Open the joint compound

• Purchase 2 or 3 buckets of the premixed type

Step 4: Apply the Joint Compound

• Using a trowel or putty knife, apply the mixed joint compound to the brick surface. Work in small sections to ensure even coverage and texture. You can apply it in a random or textured pattern, creating the desired rustic look. Allow it to dry completely.

Step 5: Sand (Optional)

• Once the joint compound is dry, you can sand it lightly to smooth out any rough areas or create a distressed effect. Wipe away any dust from sanding.

Step 6: Apply Colorant to some joint compound in a separate bucket

• Add some colorant to the middle layer so that you get some movement and a tonal effect.

Step 7: Add final layer of joint compound

• Schmear final layer of joint compound. Total process may take take 3 days total. You must let it dry in between layers, or you will get cracks.. I actually like some cracks though

Step 8: Allow to Dry

• Let the limewash dry completely, may add sealer (not neccessary)

Step 9: Sand (Optional)

• To smooth out some areas

Step 10: Apply some caulk (optional)

• Once everything is dry and the sealer (if used) has cured, you can apply caulk to where the fireplace meets the wall to give a more seamless finish

This DIY project can give your fireplace a unique and rustic appearance while adding character to your space. Remember to take your time, be patient, and embrace the imperfections for a charming final result.

 

 

Also did the same treatment to the living room fireplace

https://youtu.be/68puKdleLSU?si=CT_PSQcZdKQdR0V9